Today's Top SOA Links
From the Wires
FreeWave Technologies Extends 900 MHz IO Series With Final Release of FGR2-IOS Radio
FGR2-IOS marks first of new family of products and configurations
By: PR Newswire
Jul. 30, 2008 09:04 AM
FreeWave's FGR2-IOS (30VIO) radio provides outstanding performance and versatility in wireless transmission of process-control signals. The FGR2-IOS provides long range, remote control and monitoring of tanks, lifting stations, pumps, flow meters, fluid levels, water sources, temperatures and pressures typical of the water/wastewater and oil and gas industries.
Eliminating the need for signal wire connections at the master and thereby greatly reducing costs, the FGR2-IOS delivers data from remote analog and digital devices over a wireless link to a remote terminal unit (RTU) or programmable logic controller (PLC).
The FGR2-IOS radio with embedded IO functions is available either as a board level device or in an enclosure. Both versions operate in one of two modes: Modbus and Wire Replacement. In Modbus mode, the FGR2-IOS can be directly connected as an IO peripheral to a SCADA network. For wire replacement (wireless signal replication), the FGR2-IOS can operate as a slave linked to an FGRIO-M (master) radio. The enclosed version also includes switchable and protected internal resistors for convenience when using 4-20mA sensors.
Wireless IO Applications
FreeWave IO radios can be used in a broad range of industrial applications. Some applications served today include:
-- Tank level monitoring -- Plunger lift control -- Pump off control -- Valve control -- Temperature and pressure monitoring -- Compressor station monitoring and control FGR2-IOS Key Features -- Range: 60 miles with clear line of site -- Output power: 1 Watt -- Input voltage: 6-30 VDC -- Enclosure: A new, ruggedized enclosure version available with a din rail mount or mounting shoe -- Compatibility: Talks over the air, with FGR serial radios and FGRIO-S radios
Features Common to FreeWave's Existing FGR2-IOS & FGRIO-S Radios
Features common to both the new FGR2-IOS and the existing FGRIO-S radios include:
-- High resolution -- Low power consumption -- IO counts: AI - 4 AO - 2 in Modbus on the FGR2-IOS DI - 4 in Wire Replacement Mode; 6 in Modbus Mode DO - 2 Sensor power control -- Programmable for either Wire Replacement Mode or Modbus Mode -- Integrator's IO (All-In-One) Solar Kit
New Integrator's Solar Power Kit
In addition, FreeWave also announced the new Integrator's IO Solar Power Kit that provides an all-in-one solar kit for IO radios to simplify ordering into a one-step process. The new solar kit is ideally suited for sourcing and sizing solar systems for power remote use at IO locations. It can be used with either a whip antenna for short-range line-of-sight applications or with an external antenna, both of which come separately. The kit is recommended for use with FreeWave IO radios and is ready to set up with clear, easy instructions.
All configurations of FreeWave's new FGR2-IOS are available now for shipment. For more information, visit FreeWave's Website at http://www.freewave.com
About FreeWave Technologies
Founded in 1993, FreeWave Technologies is a world leader in the innovative
design and manufacture of ISM Band radios and wireless data solutions that are
trusted for mission critical applications around the world. Based in
PR Contact: Terri Douglas Catapult PR-IR 303.581.7760, ext. 18 (office) 303.808.6820 (cell) firstname.lastname@example.org
SOURCE FreeWave Technologies
Web 2.0 Latest News
Subscribe to the World's Most Powerful Newsletters
Subscribe to Our Rss Feeds & Get Your SYS-CON News Live!
SYS-CON Featured Whitepapers
Most Read This Week